Hussaini Sales Corporation
Chennai, Tamil Nadu
GST No. 33ASHPA6955F1ZW
TrustSEAL Verified
Payment Protected
Call 07949361140 68% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| System Type | Conventional |
| Panel Type | Fire Alarm |
| Number of Phases | 1 phase |
| Power Supply | Dual Power |
| Number of Loops | 2 loop |
| Brand | Pallex |
| Power | 230 W |
| Number of Zones | 2 zone |
| Voltage | 230 V |
| Operating Temperature | 0-40 degree c |
| Weight | 5 kg |
| Display Type | LCD |
PALEX 2 Zone Fire Alarm Panel is a conventional fire alarm control panel designed for small commercial and residential fire detection systems. It monitors up to 2 separate fire alarm zones and provides clear indication of fire, fault, and system status.
Key Features:
2-zone conventional fire alarm control panel
Compatible with smoke detectors, heat detectors and manual call points
Supports fire alarm hooters/sounders
Individual Fire & Fault indication for each zone
Mains power supply with battery backup provision
Reset, silence and evacuation controls
Easy operation and maintenance
Suitable for shops, offices, warehouses, apartments and small commercial buildings
Type: Conventional Fire Alarm Panel
Zones: 2 Zones
Brand: PALEX
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| System Type | Conventional |
| Number of Phases | 1 phase |
| Power Supply | Dual Power |
| Number of Zones | 8 zone |
| Number of Loops | 8 loop |
| Brand | Palex |
| Voltage | 230 V |
| Operating Temperature | 0-40 degree c |
| Power | 230 W |
| Operating Current | 5 A |
PALEX 8 Zone Fire Alarm Control Panel – Description
The PALEX 8 Zone Fire Alarm Control Panel is designed for reliable monitoring and control of conventional fire detection systems in commercial, industrial, and residential buildings. It supports up to 8 separate detection zones, allowing smoke detectors, heat detectors, manual call points and alarm devices to be connected and monitored zone-wise.
The panel provides clear Fire, Fault and Zone Status indications, helping users quickly identify the affected area during an emergency. Its dependable control circuitry and easy-to-operate interface make it suitable for offices, warehouses, factories, hospitals, schools, hotels and other premises requiring centralized fire alarm monitoring.
Key Features:
8-zone conventional fire alarm control panel
Zone-wise fire and fault indication
Compatible with conventional smoke and heat detectors
Supports manual call points and alarm sounders/hooters
Visual and audible alarm indication
Battery backup support for operation during power failure
Easy installation, testing and maintenance
Suitable for commercial and industrial fire alarm systems
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| System Type | Conventional |
| Number of Phases | 1 phase |
| Power Supply | Dual Power |
| Number of Zones | 4 zone |
| Number of Loops | 4 loop |
| Brand | Palex |
| Voltage | 230 V |
| Operating Temperature | 0-40 degree c |
| Power | 230 W |
| Operating Current | 5 A |
For your catalogue, these are the verified specifications available for model QT04QFP:
| Specification | Details |
|---|---|
| Model | QT04QFP |
| Type | Conventional Fire Alarm Control Panel |
| Number of Zones | 4 Zones |
| Input Supply | 220V AC |
| Frequency | 50 Hz |
| Phase | Single Phase mains supply |
| Display | 16 × 2 Dot Matrix LCD |
| Detector Capacity | Maximum 25 detectors per zone |
| Total Detector Capacity | Up to 100 detectors across 4 zones |
| Zone Indications | Fire / Open Circuit / Short Circuit |
| Zone Isolation | Yes, with zone voltage cut-off |
| Controls | Reset, Silence & Lamp Test |
| Battery Backup | Provision for SMF battery |
| Battery Charger | Inbuilt charging provision |
| Relay Output | Potential-free / free-contact relay |
| Hooter Output | Provided; output capacity can be increased as required |
| Auto Dialer | External auto-dialer attachable |
| Detector Compatibility | Compatible with conventional fire detectors |
| Status Indications | Mains ON, System ON, Charger ON, Battery Low & Common Fire |
| Standard | Designed to comply with IS 2189; manufacturer states tested by ERTL (N) |
| HSN Code | 8531 |
| Country of Origin | India |
The manufacturer specifically confirms 220V AC / 50 Hz, 4 zones, 16×2 LCD, maximum 25 detectors per zone, battery provision, relay contacts, zone isolation and fire/open/short indications.For the fields you asked about earlier
| Field | Value |
|---|---|
| Voltage | 220V AC |
| Frequency | 50 Hz |
| Phase | 1 Phase |
| Zones | 4 |
| Loops | 4 conventional detection zones — technically these are zones, not addressable loops |
| Maximum Detectors | 25 per zone / 100 total |
| Operating Temperature | Not specified in the manufacturer's published QT04QFP data |
| Current / Ampere | Not specified |
| Power / Watts | Not specified |
I recommend not entering a guessed ampere, wattage, or operating-temperature value in your catalogue because the published QT04QFP technical page does not state them. (Qutak)
Important brand note: QT04QFP is published by Qutak Security Devices as its model number. Your existing Talib Sales Corporation catalogue lists QT04QFP under PALEX, but I would verify the physical panel/nameplate before printing “PALEX” as the manufacturer. (Qutak)
Additional Information: